Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Brake Discs on Hyundai Tucson

Model: Hyundai Tucson MK 3, TL - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Brake rotors

See other generations:
Video tutorial

Loosen the bolts of the affected rear wheel, raise the car with a jack (unless you have a ramp) and completely unscrew them to remove the wheel. Unscrew the four 14 mm bolts of the brake caliper while holding the rear 17 mm bolt steady.

Use a crowbar to extract the two brake pads. Unscrew the other 14 mm bolts and remove the brake assembly.

At this point, unscrew the two screws of the disc with a screwdriver and disassemble everything by tapping with a hammer, as shown in the video. Reassemble everything in reverse order.

Good luck!


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads of the Hyundai Tucson
How to Replace the Rear Brake Pads of the Hyundai Tucson
Hyundai Tucson (2015-2021 / MK 3, TL) In this brief and simple guide, you will learn how to remove and replace the rear brake pads and handbrake pads of the Hyundai Tucson. First, raise t…
How to Replace the Key Battery of the Hyundai Tucson
How to Replace the Key Battery of the Hyundai Tucson
Hyundai Tucson (2015-2021 / MK 3, TL) Replacing the battery inside your Hyundai Tucson key is fortunately one of the simplest DIY maintenance tasks. Follow the instructions in this guide,…
How to Replace the Rear Headlamp Bulb on a Hyundai Tucson
How to Replace the Rear Headlamp Bulb on a Hyundai Tucson
Hyundai Tucson (2015-2021 / MK 3, TL) To replace the rear headlamp bulb on a Hyundai Tucson, open the boot so you can leverage an object to detach the black panel next to the light unit: …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos