Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : Rear shock absorber installation

Hyundai Santa Fe - Video tutorial

Model: Hyundai Santa Fe MK 1 - Years 2000-2006
Part: Shock absorbers
Operation: Rear shock absorber installation

Raise the car on a lift; open the front hood and intercept the cap on the plastic cover of the mudguard, under which there is the nut fixing the shock absorber stem; therefore proceed with disassembling this nut by locking the stem using snap pliers. At this point, place a stand under the swinging arm of the rear suspension in order to complete the dismantling of the shock absorber; then apply the rubber end stop and the plastic cover to the new shock absorber and proceed backwards for installation.


Posted on 17 July 2023 by ScegliAuto

This video is currently unavailable


Front shock absorber disassembly instructions
Hyundai Santa Fe (2006-2012 / MK 2) To replace the front shock absorber, lift the car on a lift and remove the front wheel; then disconnect the connecting rod that connects the shock ab
Rear shock absorber replacement
Hyundai Santa Fe (2000-2006 / MK 1) Replacing the rear shock absorbers is quite simple to perform mainly because the spring and damper are separate; once the car has been raised on spec
How to remove the front shock absorber on a Hyundai Santa Fe
Hyundai Santa Fe (2006-2012 / MK 2) Let's see how to remove the front shock absorber on a Hyundai Santa Fe? The first step to follow: we loosen the pins of the rim, lift the car on a co

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos