Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Worn Rear Shock Absorbers

Model: Hyundai Santa Fe MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Shocks

See other generations:
Video tutorial

For this operation, you will only need an 18mm socket wrench. Remove the wheel and unscrew the nut that secures one end of the shock absorber to the vehicle's chassis.

Before doing this, securely brace the entire suspension arm assembly to prevent it from falling during the operation. Safely place the vehicle on axle stands and remove the retaining pins from the suspension arm protection.

Unscrew the bolt that holds the shock absorber to the chassis and then the one on the arm using an 18mm ratchet wrench, then remove the worn suspension. Secure the new shock absorber to the base and then to the chassis.

Conduct a road test to verify proper operation.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Replacing Front Brake Pads
Replacing Front Brake Pads
Hyundai Santa Fe (2000-2006 / MK 1) Lifting the vehicle for the replacement of the brake pads will make the operation much simpler and more comfortable to perform; once lifted, remove t…
Instructions for Replacing Drop Links
Instructions for Replacing Drop Links
Hyundai Santa Fe (2000-2006 / MK 1) Wear and/or failure of the spherical joints of the drop links (which are the connecting elements between the anti-roll bar and the shock absorber) re…
How to Replace the Remote Battery on the Hyundai Santa Fe
How to Replace the Remote Battery on the Hyundai Santa Fe
Hyundai Santa Fe (2023-2026 / MK 5, MX5) Today, you will see how to replace the battery in the remote for the Hyundai Santa Fe. This remote uses the CR 2450 battery model, which can be purch…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos