Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : Rear shock absorber replacement

Hyundai Santa Fe - Video tutorial

Model: Hyundai Santa Fe MK 1 - Years 2000-2006
Part: Shock absorbers
Operation: Rear shock absorber replacement

Replacing the rear shock absorbers is quite simple to perform mainly because the spring and damper are separate; once the car has been raised on special car stands and removed the wheels, access the luggage compartment to remove the nut fixing the shock absorber rod to the bodywork, then move on to the disassembly of the pin that fixes the shock absorber to the suspension, taking care to place a jack under the suspension itself to support it during disassembly; remove the old shock absorber and insert the new one, fixing it first to the suspension and then to the body by applying the relative rubber pads.


Posted on 15 August 2023 by ScegliAuto



Front shock absorber disassembly instructions
Hyundai Santa Fe (2006-2012 / MK 2) To replace the front shock absorber, lift the car on a lift and remove the front wheel; then disconnect the connecting rod that connects the shock ab
Rear shock absorber installation
Hyundai Santa Fe (2000-2006 / MK 1) Raise the car on a lift; open the front hood and intercept the cap on the plastic cover of the mudguard, under which there is the nut fixing the shoc
How to remove the front shock absorber on a Hyundai Santa Fe
Hyundai Santa Fe (2006-2012 / MK 2) Let's see how to remove the front shock absorber on a Hyundai Santa Fe? The first step to follow: we loosen the pins of the rim, lift the car on a co

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos