Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel from a Hyundai Atos

Model: Hyundai Atos MK 1 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Door trim panel

See other generations:
Video tutorial

Before you start, open the door to work freely. Begin by unscrewing the screws that secure the door handle, then remove it. Next, repeat this step for the opening handle, but before fully removing it, disconnect the rear cable.

After this, unscrew and remove the upper door locking button. At this point, before you can remove the door panel, you need to remove the window winder handle.

To do this, use a thin but sturdy tool to insert into the gap between the handle and the door panel, and lever it off. This will remove the window winder handle. Using the thin but sturdy tool again, lever around the entire perimeter of the door panel to disengage the clips holding it in place.

Once this step is completed, you will have successfully removed the panel.


Updated on 2 May 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel on Hyundai Atos
How to Remove the Door Panel on Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) How to remove the door panel on Hyundai Atos? First, disconnect the battery terminals located in the engine bay before starting the disassembly. Begi…
How to Replace the Door Handle on a Hyundai Atos
How to Replace the Door Handle on a Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) Before you can start, open the door of your Hyundai Atos. Begin by unscrewing and removing the screw that secures the handle to the door panel using …
Removing the Door Panel on a Hyundai Atos
Removing the Door Panel on a Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) Remove the door panel on a Hyundai Atos to access the external handle. Remove all the plastic cover pieces above the panel (if present). Unscrew the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos