Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : Removing the tappet cover

Hyundai Elantra - Video tutorial

Model: Hyundai Elantra MK 3, XD - Years 2000-2006
Part: Valve
Operation: Removing the tappet cover

This video shows us how with various procedures we can remove the tappet cover on our car. First we begin to remove the plastic cover installed for simple motor cover; it is anchored by various screws and to remove it it is also necessary to unscrew the engine oil cap. Once extracted, remove all the spark plugs so that the lid can be removed; unscrew and remove all the screws that anchor the tappet cover and extract it. For a subsequent assembly, remember to carefully clean the residues of the old gasket and install a new one suitable for our car.


Posted on 1 August 2023 by ScegliAuto



Engine air filter replacement
Hyundai Elantra (2000-2006 / MK 3, XD) The engine air filter container (AIRBOX) is located immediately behind the battery, next to the tappet cover; then release the metal tabs that block
How do you replace the speaker of the Hyundai Elantra?
Hyundai Elantra (2015-2020 / MK 6) In order to replace the speaker of the Hyundai Elantra, you need to remove the corresponding door panel. This can be done by removing the protective
Replace Hyundai Elantra door handle
Hyundai Elantra (2015-2020 / MK 6) Let's see how to replace the exterior door handle of a Hyundai Elantra. We open the door of the Hyundai and remove the cover cap of the hole (on the

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos