Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : How to replace the cabin air filter in Hyundai Santa Fe?

Hyundai Santa Fe - Video tutorial

Model: Hyundai Santa Fe MK 2 - Years 2006-2012
Part: Cabin air filter
Operation: How to replace the cabin air filter in Hyundai Santa Fe?

The cabin air filter in the Hyundai Santa Fe is located behind the glovebox. This must be emptied so that once it is open we can remove the two fixing pins by turning them anticlockwise. Once this is done, we release the side stop and overturn the drawer. We can now access the area behind it which contains the pollen filter box. Remove the lid by levering on the side parts and extract the old filter, throw it away and insert a new filter in its place, being careful to do it in the correct direction. We finish the job by repositioning the lid and the glovebox.


Posted on 2 December 2022 by ScegliAuto



Hyunday Santa Fe cabin filter replacement
Hyundai Santa Fe (2006-2012 / MK 2) In this video we are going to see how to replace the cabin air filter on the Hyundai Santa Fe SUV. The filter is located in the position of the glove
How to replace the air filter on Hyundai Santa Fe
Hyundai Santa Fe (2012-2018 / MK 3) To replace the air filter of the Hyundai Santa Fe we start by opening the engine hood, we release the tabs that hold the cover of the air filter box,
How to replace the cabin filter on a Hyundai Santa Fe.
Hyundai Santa Fe (2006-2012 / MK 2) In this video tutorial, we can see how it is possible to replace the cabin filter in a Hyundai Santa Fe, following some simple steps: the first thing

    Frequently Asked Questions

    • Santa Fe 2006-2012 - How much does the cabin filter on the Hyundai Santa Fe cost? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos