Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : How to replace the Hyundai Elantra steering wheel steering angle sensor solenoid

Hyundai Elantra - Video tutorial

Model: Hyundai Elantra UD, MD, MK 5 - Years 2010-2015
Operation: How to replace the Hyundai Elantra steering wheel steering angle sensor solenoid

Let's find out in this short and simple guide how to disassemble and replace the steering angle sensor solenoid of the Hyundai Elantra. First we get on board the car and begin to remove the plastic bulkhead that we find under the steering wheel; then we go to locate the steering angle sensor solenoid, as shown in the video. At this point we unscrew the screws of the solenoid and disconnect the electrical wiring to remove it and replace it with the new one (installing its original spare); to access the steering column it is necessary to remove the instrument panel and the entire steering wheel.


Posted on 4 September 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos