Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. ix20
    4. : How to reset service in Hyundai IX20?

Hyundai ix20 - Video tutorial

Model: Hyundai ix20 OJ - Years 2010-2019
Part: Checks and maintenance
Operation: How to reset service in Hyundai IX20?

As we can see in this tutorial, resetting the service light in the Hyundai IX20 is a very simple and fast operation. Before proceeding, we will obviously have to complete all the planned maintenance work. We start by inserting the key and turning on the instrument panel, then, using the "Trip" button located on the right-hand side of the steering wheel, scroll through the display screens until we reach the one relating to the service. Subsequently, hold down the "Reset" key once to start the reset, and a second time to confirm it. We then restart the framework and verify that the procedure was successful.


Posted on 24 November 2022 by ScegliAuto

    Frequently Asked Questions

    • Ix20 2010-2019 - Where is the Hyundai Ix20 telepass installed? Read Answer
    • Ix20 2010-2019 - Why doesn't the tire pressure warning light on my Hyundai Ix20 go off? Read Answer
    • Ix20 2010-2019 - What are the lights of the Hyundai Ix20? Read Answer
    • Ix20 2010-2019 - What is causing the Hyundai Ix20 parking sensor problem? Read Answer
    • Ix20 2010-2019 - What warning lights are there in the dashboard of the Hyundai IX20? Read Answer
    • Ix20 2010-2019 - What does the ESP light on the Hyundai Ix20 indicate? Read Answer
    • Ix20 2010-2019 - Why does the steering of a Hyundai IX20 make noise? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos