Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Sonata
    4. : Where is the fuse box located in the cabin of the 2023 Hyundai Sonata?

Hyundai Sonata - Video tutorial

Model: Hyundai Sonata DN8 - Years 2020-2024
Part: Fuse box
Operation: Where is the fuse box located in the cabin of the 2023 Hyundai Sonata?

If you're wondering where the fuse box is located inside the cabin of your new 2023 Hyundai Sonata, then all you need to do is read the following instructions to be able to locate it on your own and safely. First of all, enter your car and reach the driver's seat. Immediately after, locate the small compartment located in the lower left area of the dashboard and remove the cover. Once this operation is complete, you will finally have access to the fuses you were looking for. Remember that you cannot work on them unless you disconnect the battery first.


Posted on 5 April 2023 by ScegliAuto



Where is the fuse box located in the 2016 Hyundai Sonata?
Hyundai Sonata (2015-2019 / LF) In the following guide, we will discover together where the box containing all the various fuses of your 2016 Hyundai Sonata is located. Before start
Where is the windshield wiper fuse located in the Hyundai Sonata?
Hyundai Sonata (2005-2010 / NF, MK 5) In this video, we can see where the windshield wiper fuse is located in the Hyundai Sonata, which is the first component to check in case of malfunct
What is the fuse diagram for the Hyundai Sonata?
Hyundai Sonata (2005-2010 / NF, MK 5) In this video, we can see the fuse diagrams of the Hyundai Sonata and where their respective boxes are located. This information is useful in case we

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos