Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform a Service on a Hyundai Grandeur Azera

Model: Hyundai Grandeur Azera MK 5, HG - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Engine oil

See other generations:
Video tutorial

In this guide, we will explore the main instructions for performing the routine maintenance service on a Hyundai Grandeur Azera, which includes changing the engine oil and oil filter. First, raise the vehicle and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes.

Then, unscrew the oil filter cartridge using the appropriate wrench, and gently screw in and tighten the new one. Finally, open the hood and unscrew the fill cap to top off the oil!


Updated on 5 August 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Factory Radio in the Hyundai Grandeur Azera
How to Remove and Replace the Factory Radio in the Hyundai Grandeur Azera
Hyundai Grandeur Azera (2005-2011 / MK  4, TG) In this guide, see how to remove and replace the factory radio in the Hyundai Grandeur Azera by following the instructions below. First, get inside t…
How to Replace the Serpentine Belt on a Hyundai Grandeur Azera
How to Replace the Serpentine Belt on a Hyundai Grandeur Azera
Hyundai Grandeur Azera (2005-2011 / MK  4, TG) This guide provides instructions to remove and replace the serpentine belt on a Hyundai Grandeur Azera. First, lift the vehicle and remove the right …
How to Remove the Door Panel of the Hyundai Grandeur Azera
How to Remove the Door Panel of the Hyundai Grandeur Azera
Hyundai Grandeur Azera (2005-2011 / MK  4, TG) Today, you will learn how to remove the front door panel of the Hyundai Grandeur Azera. First, open the front door and start by removing the triangul…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos