Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Tucson
    4. : Replacement of the battery for the Hyundai Tucson key remote.

Hyundai Tucson - Video tutorial

Model: Hyundai Tucson MK 4, NX4 - Years 2022-2024
Part: Battery
Operation: Replacement of the battery for the Hyundai Tucson key remote.

Let's see the necessary steps to disassemble and replace the battery of the electronic key remote for the Hyundai Tucson, in simple and quick steps. First, take the remote in hand and start by removing the physical key from inside it. Then, using something thin and pointed, leverage the side slot to remove the plastic cover and access the battery and internal electronic board, as shown in the video. At this point, replace the battery with the new one (in this case a CR 2032 3V battery); insert it in the correct orientation and reassemble the remote cover and the physical key.


Posted on 10 November 2023 by ScegliAuto



Hyundai Tucson remote control battery replacement
Hyundai Tucson (2004-2009 / JM, MK 1) Is the Tucson key battery dead? Do we want to replace it? Let's see how the key is removed from inside. We take the remote control key and separate t
Replacement of the battery of the Hyundai Tucson key remote.
Hyundai Tucson (2015-2021 / MK 3, TL) The steps outlined in this guide will show us how to disassemble and replace the battery of the Hyundai Tucson key remote. First, we take our remote
How to change the key battery on Hyundai Tucson
Hyundai Tucson (2004-2009 / JM, MK 1) How to change the key battery of a Hyundai Tucson? Let's see how to disassemble the remote control and how to replace the battery inside. We take our

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos