Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Key Fob Battery on a Hyundai Tucson

Model: Hyundai Tucson MK 3, TL - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Key

See other generations:
Video tutorial

The steps outlined in this guide will show you how to remove and replace the battery in the key fob of a Hyundai Tucson. First, take your key fob and start by removing the physical key from inside it; then use the gap created to pry off the cover of the fob, accessing the battery and the electronic board, as shown in the video.

At this point, remove the battery and replace it with a new one of the correct type (in this case, a CR 2032 3V); reassemble the plastic cover and the physical key!


Updated on 13 September 2026 by ScegliAuto


Related tutorials

Hyundai Tucson (2004-2009 / JM, MK 1) Is the battery in your Tucson key dead? Want to replace it? Here's how to disassemble the key. Take the remote key and separate the piece: remove the…
Hyundai Tucson (2022-2026 / NX4, MK 4) Here’s how to remove and replace the battery of the key remote for the Hyundai Tucson. First, take your remote and start by removing the physical key…
Hyundai Tucson (2022-2026 / NX4, MK 4) These brief and simple instructions will show you how to disassemble and replace the battery in the Hyundai Tucson remote key. First, take the remote…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos