Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I40
    4. : How to reset the service light on the Hyundai I40?

Hyundai I40 - Video tutorial

Model: Hyundai I40 MK 1 - Years 2011-2019
Part: Checks and maintenance
Operation: How to reset the service light on the Hyundai I40?

To reset the service light of the Hyundai I40, we need to turn on the instrument panel and press the buttons on the steering wheel to access the service menu. Then we select the "Setting" option and then select the "Maintenance" option and hold down the button until the reset is complete. We return to the main menu and turn off the vehicle, wait a few seconds to turn on the instrument panel again and confirm that the vehicle has been reset. If the service light does not turn off, go to the workshop to perform a computerized check of the car and determine the cause.


Posted on 5 February 2024 by ScegliAuto

    Frequently Asked Questions

    • I40 2011-2019 - How do you turn off the "EPB" light on a Hyundai i40? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos