Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : How to reset the maintenance on a Hyundai Santa Fe

Hyundai Santa Fe - Video tutorial

Model: Hyundai Santa Fe MK 3 - Years 2012-2018
Part: Checks and maintenance
Operation: How to reset the maintenance on a Hyundai Santa Fe

In this very useful video tutorial today, you will see how to reset the maintenance notification on a Hyundai Santa Fe, third-generation model produced from 2012 to 2018. Let's start the procedure by turning on the vehicle's instrument panel without starting the engine. Then, press the menu button located on the lower right side of the steering wheel until the maintenance notification appears on the speedometer's information display. Once that is done, press and hold the "ENTER" button located below the menu button to reset the notification and complete the task.


Posted on 6 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Santa Fe 2006-2012 - What to do if the handbrake of Hyundai Santa Fe 2 is not working? Read Answer
    • Santa Fe 2000-2006 - Where is the jack on the Hyundai Santa Fe? Read Answer
    • Santa Fe 2012-2018 - What are the spies of the Hyundai Santa Fe? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos