Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : How to reset the service light on the Hyundai Santa Fe

Hyundai Santa Fe - Video tutorial

Model: Hyundai Santa Fe MK 3 - Years 2012-2018
Part: -board computer
Operation: How to reset the service light on the Hyundai Santa Fe

In this article we will see the procedure to reset the maintenance light of the Hyundai Santa Fe, in case it remains on after having the car serviced. To do this it will take less than 1 minute and no tools are needed. To reset it, we must first start the instrument panel, after which we must press the appropriate button located at the bottom right of the steering wheel to navigate the menu until we find the maintenance light, once found press and hold the confirmation button at the bottom in the shape of enter for 5 seconds, at the end of the 5 seconds the word reset will appear below the light, at this point release the button and press it again once to confirm that you want to reset. Now the procedure is complete, so restart the instrument panel to verify that the procedure was successful.


Posted on 11 March 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos