Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Hyundai Santa Fe?

Model: Hyundai Santa Fe MK 3 - Years 2012-2018
Part: Service warning light

To reset the "Service" light on a Hyundai Santa Fe, start by turning on the instrument panel without starting the engine. Use the buttons on the steering wheel to navigate through the onboard computer menu. Look for the maintenance option in the menu. Once found, follow the instructions provided by the onboard computer to reset the "Service" light. This may involve holding down a button for a few seconds or confirming the operation through the menu. After completing the reset, the "Service" light should turn off. Turn off the instrument panel and turn it back on to verify that the procedure was performed correctly and that the light is no longer on. This process ensures that the maintenance reminder for your Hyundai Santa Fe is updated and that the service alert is no longer displayed.

Posted on 11 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Hyundai Santa Fe
How to reset the service light on the Hyundai Santa Fe
Hyundai Santa Fe (2019-2023 / MK 4, TM) Thanks to the steps described in the following guide, you will be able to complete the manual reset of the service light of your Hyundai Santa Fe in …
Resetting the Service Light on the Hyundai Santa Fe
Resetting the Service Light on the Hyundai Santa Fe
Hyundai Santa Fe (2012-2018 / MK 3) Follow these instructions to reset the maintenance light for the engine oil change on the Hyundai Santa Fe. First, get inside the vehicle and turn on…
How to reset the service light on the 2018 Hyundai Santa Fe
How to reset the service light on the 2018 Hyundai Santa Fe
Hyundai Santa Fe (2012-2018 / MK 3) The reset of the service light on a 2018 Hyundai Santa Fe follows simple and quick steps that can be done independently. To reset the light, turn on …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos