Do it yourself
Frequently asked questions about cars and motorcycles

Infiniti EX35: How to Replace Rear Brake Pads and Discs

Model: Infiniti Ex MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Brake rotors

Video tutorial

Position the vehicle on a level surface, raise the rear, and remove the wheel to access the brake assembly. Loosen the caliper by gently prying on the worn pads, then slide it off and support it without putting any strain on the flexible hose.

If there are seized sliding pins, use a release agent to free them before reassembly. Proceed to remove the caliper bracket, as shown in the video, using a 19 mm socket and spanner; extract the pads and slide off the disc.

Clean the bracket thoroughly, remove the old pad clips, restore the sliding pins, and apply brake grease only at the contact points. Install the new disc, reattach the bracket (thread-lock is applied to the bolts in the video), insert the pads, and reposition the caliper ensuring smooth movement.

Check the parking brake mechanism visible behind the drum disc, then reinstall the wheel, lower the vehicle, and pump the pedal to restore travel before using the Infiniti EX35.


Posted on 11 May 2026 by ScegliAuto


Related tutorials

Infiniti Ex (2008-2013 / MK 1) In this video tutorial, you can see how to replace the pollen filter on the Infiniti EX 35 by following a few simple steps: the first thing to do is …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos