Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fog Light Bulbs on the Infiniti JX 35

Model: Infiniti JX 35 L50 - Years: 2012, 2013
Part: Fog lights

Video tutorial

In this video tutorial, we will see how to remove and replace the front fog light bulbs on the Infiniti JX 35. First, move to the front of your vehicle and begin unscrewing the mounting screws located under the bumper to access the back of the fog light; then, disconnect the electrical connector and remove the bulb from the socket, as shown in the video.

At this point, replace the bulb with a new one of the correct type; insert it properly into the socket and reassemble everything by following the reverse procedure!


Updated on 23 May 2026 by ScegliAuto


Related tutorials

Infiniti JX 35 (2012-2013 / L50) To replace the headlight bulb on an Infiniti JX 35, open the hood to access the components inside the engine compartment. Once you have access to the…
Infiniti JX 35 (2012-2013 / L50) The Infiniti JX 35 has 71 fuse slots, not all occupied, located in three different boxes. The first is inside the cabin and contains fuses numbered 1…
Infiniti JX 35 (2012-2013 / L50) Today, you will learn how to remove and replace the front wheel bearing on the Infiniti JX 35 by following the instructions below. First, lift the ve…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos