Do it yourself
| ||||
|
Infiniti JX 35 - Video tutorial
Model: Infiniti JX 35
L50
- Years 2012-2013 Today we will see, in this video tutorial, how to disassemble and replace the front wheel bearing of the Infiniti Jx 35, following the instructions below. First of all we lift the car and remove the front wheel; after which we unscrew the fixing screws of the front brake caliper, in order to remove it from the disc, as shown in the video. At this point we are going to remove the cotter pin of the central nut, using a socket wrench to unscrew it; we remove the disc and then the wheel bearing, applying the reverse procedure for reassembly!
Posted on 6 May 2024 by ScegliAuto
Other guides that may interest you
|
How to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.011
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |