Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Warning Light on the Iveco Daily

Model: IVECO Daily MK 5 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

When the oil warning light illuminates on the 2023 Iveco Daily, it indicates that you need to top up the oil in the reservoir before resetting the light. To reset, turn on the ignition without starting the vehicle, press the accelerator pedal fully, then press the brake pedal 10 times.

Release both pedals immediately after. To complete the reset of the oil warning light, turn off and then restart the ignition of the Iveco.

If the light does not turn off, it may be necessary to visit a workshop for a diagnostic check.


Updated on 4 November 2026 by ScegliAuto


Related tutorials

Reset maintenance reminder (service) of the Iveco Daily
Reset maintenance reminder (service) of the Iveco Daily
IVECO Daily (2014-2026 / MK 5) Today's procedure will allow us to reset the maintenance reminder for the engine oil change of the Iveco Daily. First, we get on board the vehicle an…
How to reset the service light on the Iveco Daily
How to reset the service light on the Iveco Daily
IVECO Daily (2014-2026 / MK 5) Today we will see the instructions on how to reset the maintenance reminder for the engine oil change of the Iveco Daily. First of all, we get on boa…
How to Reset the Service Light on the Iveco Daily
How to Reset the Service Light on the Iveco Daily
IVECO Daily (2014-2026 / MK 5) This guide will allow you to reset the service light for the regular maintenance oil change of the Iveco Daily. First, get into the vehicle and turn …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos