Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Iveco Daily

Model: IVECO Daily MK 5 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

Today we will see the instructions on how to reset the maintenance reminder for the engine oil change of the Iveco Daily. First of all, we get on board the cabin and start by turning on the instrument panel; then we press and hold down the accelerator pedal, also pressing the brake pedal seven times, as shown in the video.

At this point, we turn off the instrument panel and then start the engine, completing the reset operation of the service; we verify the correct reset of the maintenance message from the instrument panel!


Posted on 9 September 2025 by ScegliAuto


Related tutorials

How to reset the service light on the Iveco Daily
How to reset the service light on the Iveco Daily
IVECO Daily (2014-2026 / MK 5) To reset the service light on the Iveco Daily, follow these steps: Turn on the Iveco Daily and ensure the service light is displayed on the dashboard…
How to Reset the Service Light on an Iveco Daily?
How to Reset the Service Light on an Iveco Daily?
IVECO Daily Today, let's learn how to reset the oil change service light on an Iveco Daily by following the instructions below. First, get inside the vehicle and…
How to Reset the Service Light on the Iveco Daily?
How to Reset the Service Light on the Iveco Daily?
IVECO Daily To reset the Service light on the Iveco Daily, press the accelerator pedal while the vehicle is completely off: while holding it down, turn the key i…

Other guides you may be interested in

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos