Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the timing belt of the Iveco Daily?

Model: IVECO Daily MK 5 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Timing belt

See other generations:
Video tutorial

To replace the timing belt of the Iveco Daily, you need to loosen the screws that secure the front bumper of the vehicle to its housing: this must be completely removed along with the corresponding grille. This way, you can locate the front part of the engine: now you need to loosen the central nut that secures the tensioner pulley.

The tension of the timing belt can be reduced so that it can be removed from its seat: after removing the old belt, you can insert the new one, making sure everything is functioning properly.


Posted on 22 January 2025 by ScegliAuto


Related tutorials

Replacing the Timing Belt of the Iveco Daily
Replacing the Timing Belt of the Iveco Daily
IVECO Daily In this guide, we will go through the steps to remove and replace the timing belt of the Iveco Daily. First, open the bonnet and remove the front bum…
How to Replace the Timing Belt on an Iveco Daily 2.3
How to Replace the Timing Belt on an Iveco Daily 2.3
IVECO Daily (2006-2020 / MK 4) Today's guide will show you the steps necessary to remove and replace the timing belt on an Iveco Daily 2.3. First, open the bonnet and remove the fr…
Change the Timing Belt on the Iveco Daily 2 35-8 (8140)
Change the Timing Belt on the Iveco Daily 2 35-8 (8140)
IVECO Daily (1989-2000 / MK 2) This video shows the main steps to dismantle and replace the timing belt on the Iveco Daily 35-8 second series, from 1990, with code 8140. First, ope…

Other guides you may be interested in

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos