Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Iveco Daily oil warning light

Model: IVECO Daily
Part: Service warning light

Resetting the Iveco Daily's oil warning light is a very simple operation that can be performed in complete autonomy. With the help of this short video tutorial we will explain to you step by step what to do. First we turn on the ignition of our car and without turning on the engine we go to press the accelerator pedal for 23 seconds. After 23 seconds we start pressing the brake pedal 10 times. Once this operation has been carried out, release both pedals and switch off the vehicle ignition. We wait a few minutes and then we start the car the light should have gone out.

Posted on 28 March 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the EDC warning light on the Iveco Daily?
How to reset the EDC warning light on the Iveco Daily?
IVECO Daily (2014-2024 / MK 5) The EDC warning light on the Iveco Daily turns on when the oil level in the tank is no longer sufficient and it is necessary to top it up to avoid fu…
How to reset the Iveco Daily service light
How to reset the Iveco Daily service light
IVECO Daily Today, let's find out how to reset the Iveco Daily oil change routine maintenance warning light by following the instructions below. First of all, we…
How do you reset the Iveco Daily Oil Service light?
How do you reset the Iveco Daily Oil Service light?
IVECO Daily (2006-2020 / MK 4) In order to reset the Iveco Daily Oil Service warning light, you have to turn the key to turn on the instrument panel, noting that the warning light …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos