Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Jaguar E-Pace

Model: Jaguar E-Pace MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Warning light – error code

Video tutorial

In today's video, we will see how to clear the expired service message on the Jaguar E-Pace (this also applies to other Jaguar models). Turn on the vehicle's instrument cluster by pressing the start & stop button once.

Now, keep the door open and press the accelerator and brake pedals fully. After about ten seconds, the service reset message will appear.

Now turn off the ignition, and upon restarting, the expired service message will be gone. If it is not, we recommend trying again or performing it via diagnostic software connected to the OBD port.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Jaguar E-Pace?
How to Reset the Service Light on a Jaguar E-Pace?
Jaguar E-Pace (2017-2024 / MK 1) .. To reset the Service light on a Jaguar E-Pace, connect a diagnostic tool to the vehicle's OBD port: this port is located on the dashboard just.. …
How to reset the service light of the Jaguar E-Pace
How to reset the service light of the Jaguar E-Pace
Jaguar E-Pace (2017-2024 / MK 1) .. reset of the service light on your Jaguar E-Pace. First of all, get into the car and turn on the instrument panel, then press and hold both the accelerator.. …
How to Reset the Service Light on the Jaguar E-Pace
How to Reset the Service Light on the Jaguar E-Pace
Jaguar E-Pace (2017-2024 / MK 1) .. the instrument cluster display of your Jaguar E-Pace even after the regular service, you need to perform a manual reset of the light. Below are the steps.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos