Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jaguar
    3. :
  3. Xj
    4. : Removing the radio from the dashboard

Jaguar Xj - Video tutorial

Model: Jaguar Xj X300, MK 3 - Years 1994-1997
Part: Car stereo
Operation: Removing the radio from the dashboard

Proceed by opening the center tunnel storage hatch. Unscrew the screws located near the lid locking magnets. Remove the ashtray and disconnect the fastons. Remove the plastic frame around the shift lever. Manually unscrew the plastic screws (two wing nuts) under the gearshift tunnel, bring the gear lever down and remove the cover. Unscrew all the screws holding the radio support and carefully remove the dashboard by pulling it out of the compartment. Disconnect all the connectors of the electrical wiring and carefully remove the radio, paying attention to the gear lever.


Posted on 24 June 2023 by ScegliAuto



How to retrieve the Jaguar Xj X350 car radio/navigator code
Jaguar Xj (2003-2007 / X350) In today's video we will see the procedure necessary to retrieve the Jaguar Xj X350 car radio or navigator code, by following these simple steps. Fir
Where is the fuse box located in the Jaguar XJ?
Jaguar Xj (2009-2019 / MK 9, X351) Unlike many other cars, in the Jaguar XJ the fuse box is not located inside the dashboard or in the engine compartment. Below, we will discover toget
Dashboard disassembly on Jaguar XJ
Jaguar Xj (1986-1994 / MK 4, XJ 40) Remove the plastic placed behind the steering wheel by unscrewing the four screws that secure it. At this point, unscrew all the screws that secure t

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos