Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Engine Oil on a Jeep Wrangler

Model: Jeep Wrangler JL, MK 4 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

See other generations:
Video tutorial

In this brief tutorial, you will see the entire procedure required, using only the buttons on the left side of the steering wheel, to reset the remaining life of the engine oil on a Jeep Wrangler, fourth generation model produced from 2018 onwards. Start by turning the ignition to the third position without starting the engine, then press the right arrow followed by the down arrow to enter the vehicle information screen.

Now press the right arrow again until you see the screen related to the remaining life of the engine oil. Then, press and hold the "OK" button to perform the reset and complete the task.


Updated on 28 October 2026 by ScegliAuto


Related tutorials

How to reset the oil light on the 2025 Jeep Wrangler
How to reset the oil light on the 2025 Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) If you want to find out how to manually reset the engine oil light on your new Jeep Wrangler (year 2025), all you have to do is read the following st…
How to Replace Engine Oil
How to Replace Engine Oil
Jeep Wrangler Change engine oil in the Jeep Wrangler. …
How to Reset the Oil Light on the 2016 Jeep Wrangler
How to Reset the Oil Light on the 2016 Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) If you do not know the procedure to manually reset the engine oil light on your 2016 Jeep Wrangler, simply read the following guide carefully and app…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos