Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Jeep Compass?

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

To completely make the Service indicator disappear from the instrument panel of the Jeep Compass, you will need to insert the ignition key into the ignition switch, turning it to turn on the instrument panel. Once the instrument panel is turned on, you will need to hold down the accelerator pedal and at the same time press the brake pedal three times.

When this operation is completed, you will need to release the pedals by turning off the instrument panel. Once the instrument panel is turned off, you will need to turn it on again to verify that the indicator reset has been completed.


Posted on 16 January 2025 by ScegliAuto


Related tutorials

How to Reset the Oil Change Light on a Jeep Compass
How to Reset the Oil Change Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Before you can start, sit in the driver's seat of your Jeep Compass. Begin by activating the instrument cluster without starting the engine by pressi…
Resetting the Service Light on the Jeep Compass
Resetting the Service Light on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Follow these brief steps to reset the service light for the engine oil change maintenance on the Jeep Compass. First, get inside the vehicle and turn…
How to Reset the Service Light on a Jeep Compass?
How to Reset the Service Light on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To reset the Service light on a Jeep Compass, turn on the ignition by inserting the key into the corresponding switch: once the ignition is on, scrol…

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos