Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Key/Remote Battery of the Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Key

To replace the battery of the key/remote for the Jeep Renegade, first, release the actual key from its housing (using the designated button). Now, remove the remote cover and, using a screwdriver or any flat tool, preferably plastic, proceed to remove the small protective cover (where it says "Jeep") from the battery housing. Insert the screwdriver into the gap between the remote and the small cover. Slide the screwdriver around the entire perimeter of the cover, and it will come off. You now have access to the battery for replacement.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Key Fob Battery on a Jeep Renegade
Replacing the Key Fob Battery on a Jeep Renegade
Jeep Renegade (2014-2021 / ) The video shows how to replace the battery in the key fob of a Jeep Renegade. This is a very simple operation that can be done in just a minute on yo…
Replacement of the Jeep Renegade key remote battery
Replacement of the Jeep Renegade key remote battery
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video tutorial, we will see how to disassemble and replace the battery of the key remote for the Jeep Renegade, through these simple steps. F…
How to Replace the Key Fob Battery on a 2015 Jeep Renegade
How to Replace the Key Fob Battery on a 2015 Jeep Renegade
Jeep Renegade (2014-2024 / ) Today, you will learn how to replace the battery in a key fob for a 2015 Jeep Renegade. The replacement battery we will use is the CR 2032 model, 3 v…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - Why is the electronic key no longer detected in the Jeep Renegade? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos