Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front door on the Jeep Wrangler?

Model: Jeep Wrangler JL, MK 4 - Years 2018-2026
Part: Car door

In this tutorial we can see how to disassemble the front door in the Jeep Wrangler, an extremely simple and quick operation. First of all, we open the door in question, then we locate the small panel indicated in the lower area of the cabin, unhook it and disconnect the large connector just released. We then unscrew the end stop bolt with a Torx T40 key, unscrew the bolts of the two hinges with a Torx T50 key and remove the door from the supports. To install the replacement, simply follow the reverse procedure.

Posted on 24 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front speakers of the Jeep Wrangler
Replacement of the front speakers of the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Let's briefly see the instructions that will allow us to disassemble and replace the front speakers of the Jeep Wrangler, in simple steps. First, we …
How to remove the doors on Jeep Wrangler
How to remove the doors on Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) How to remove the doors on our Jeep Wrangler? Let's see in this video how to disassemble the doors: get the special keys supplied by Jeep, unscrew th…
How to remove the front door of the Jeep Wrangler
How to remove the front door of the Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) In today's video tutorial we will see the steps on how to remove the front door of the Jeep Wrangler fourth series, of 2021. First of all, let's star…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos