Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Jeep Compass?

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

The Service light that is shown on the Jeep Compass dashboard can be reset by inserting the ignition key into the ignition switch, turning it to turn on the instrument panel. Once the instrument panel is turned on, you will need to hold down the accelerator pedal and at the same time press the brake pedal three times.

Once this operation is done, release the pedals and turn off the instrument panel. After turning off the instrument panel, turn it back on to verify that the reset of the light is complete.


Posted on 20 June 2025 by ScegliAuto


Related tutorials

How to reset the service light on the Jeep Compass
How to reset the service light on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) The instructions in this guide will show you how to reset the service light for the regular maintenance of the engine oil change on the Jeep Compass.…
How to Reset the Maintenance Light on a Jeep Compass
How to Reset the Maintenance Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Today's instructions will allow you to reset the maintenance light on the Jeep Compass in simple steps. First, get into the vehicle and turn on the i…
Resetting the Service Light on the Jeep Compass
Resetting the Service Light on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Follow these brief steps to reset the service light for the engine oil change maintenance on the Jeep Compass. First, get inside the vehicle and turn…

Other guides you may be interested in

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos