Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil change light on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Service warning light

In this video, we will see how to reset the service light on the Jeep Renegade. The method recommended by the Manufacturer would be to use professional equipment, but there is an empirical method that achieves the same result, which we will show you. So, let's get in the car and make sure all doors, the rear trunk, and the engine compartment are closed. Turn on the ignition, and you will see the maintenance symbol displayed along with the service message. Within 10 seconds of turning on the ignition, press and release the accelerator pedal three times. At this point, we can turn off the ignition: the service light will be reset.

Posted on 13 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the 2020 Jeep Renegade
Jeep Renegade (2014-2023 / ) Resetting the oil light on the 2020 Jeep Renegade is a simple and quick process to be done independently. First, turn on the vehicle's instrument pan…
How to reset the oil light on the Jeep Renegade
How to reset the oil light on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this new guide aimed at all of you who own a Jeep Renegade, we will discover the steps you need to take if you intend to manually reset the engine…
How to reset the oil light on the Jeep Renegade
How to reset the oil light on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) The oil light on the Jeep Renegade comes on when an oil change is needed. After performing the replacement procedure, it is important to complete the…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - Why did the oil change light come on in the Jeep Renegade? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos