Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Service on a Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Service warning light

In today's video, we will see how to reset the engine oil change service on a Jeep Cherokee, model produced from 2013 onwards, using only the left button on the steering wheel. Start by turning the vehicle's ignition to the second position without starting the engine. Then, press the up and down buttons to cycle through the display screens until you reach the vehicle information screen as shown in the video. Once there, use the left and right arrows to navigate to the oil service screen, and finally, press and hold the "OK" button to reset the service and complete the task.

Posted on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Cherokee (2013-2023 / KL, MK 5) This guide shows you how to reset the oil maintenance service on a Jeep Cherokee. It's a very straightforward operation: enter the vehicle and turn o…
Jeep Cherokee (2013-2023 / KL, MK 5) This tutorial shows how to reset the oil service on the Jeep Cherokee, a very simple and quick operation. Before proceeding, ensure you have complete…
Jeep Cherokee (2013-2023 / KL, MK 5) In this video, you can see how to reset the oil service warning light on the Jeep Cherokee, an operation to be performed only after completing the sc…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos