Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Battery

This video is currently unavailable

How to replace the battery in a Jeep Renegade. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet, releasing the locking lever with your fingers, and secure it. Once the engine compartment is open, you will find the battery at the top left; remove the securing pins of the battery terminals with the appropriate spanner; take out the battery from the engine compartment and replace it with a new one (same voltage).

Close the engine bonnet after maintenance. Test the vehicle's operation.


Updated on 14 March 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Jeep Renegade?
How to Replace the Battery in a Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the battery in a Jeep Renegade, open the bonnet to access the engine compartment: the battery is located inside, at the top right near the…
Replacing the Key Fob Battery on a Jeep Renegade
Replacing the Key Fob Battery on a Jeep Renegade
Jeep Renegade (2014-2021 / ) The video shows how to replace the battery in the key fob of a Jeep Renegade. This is a very simple operation that can be done in just a minute on yo…
How to Replace the Remote Key Battery of a Jeep Renegade
How to Replace the Remote Key Battery of a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Learn how to change the battery of the remote key for a Jeep Renegade. Take your remote key and use a screwdriver to pry at the side of the key cover…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos