Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Warning light – error code

Let's see how to reset the warning light that appears on the instrument cluster of the Jeep Renegade. Enter the vehicle and turn on the instrument cluster using the button next to the steering wheel. Press the accelerator pedal three times in quick succession, then release the pedal and turn off the instrument cluster. Review any changes made to the vehicle and always remember to make adjustments to the onboard computer while the vehicle is stationary and off. Start the Jeep and then check for any warning lights that appear on the information instrument cluster.

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the service light on a 2016 Jeep Renegade
Resetting the service light on a 2016 Jeep Renegade
Jeep Renegade (2014-2021 / ) The video shows how to reset the service light on a 2016 Jeep Renegade. It is a very simple DIY operation that takes just a few minutes. It should be…
Resetting the Service on a Jeep Renegade
Resetting the Service on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) On the Jeep Renegade, you can reset the service by following some essential steps. First, before resetting the service, perform maintenance (change f…
TPMS: How to Reset the Tyre Pressure Sensor on the Jeep Renegade
TPMS: How to Reset the Tyre Pressure Sensor on the Jeep Renegade
Jeep Renegade (2014-2024 / ) On the Jeep Renegade, resetting the TPMS is done after adjusting the pressures according to the chart on the door pillar. With the Jeep Renegade stat…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2021 - How to reset the Uconnect system in the Jeep Renegade? Read answer
    • Jeep Renegade 2014-2026 - What to do if the brake pad warning light appears on Jeep Renegade? Read answer

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos