Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Key Battery on a Jeep Compass MK2

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Key

See other generations:
Video tutorial

In today's video tutorial, see how to disassemble and replace the battery in the remote key of the second series Jeep Compass in simple and quick steps. First, take your remote and start by removing the physical key; then, lever the sides of the remote to open it into two parts, as shown in the video.

At this point, remove and replace the battery with a new one of the correct type (in this case, a CR2032 3V); insert it the correct way in the battery compartment and reassemble everything, following the video to the end!


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery on a Jeep Compass?
How to Replace the Key Fob Battery on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To replace the battery in the key fob of a Jeep Compass, press the button located on the side of the device to extract the key. Once this is removed,…
How to Replace the Remote Battery of the Jeep Compass?
How to Replace the Remote Battery of the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To replace the remote battery of the Jeep Compass, move the switch on the back of the remote to slide out the key and the chrome cover on the top of …
Replacing the Key Fob Battery for the Jeep Compass
Replacing the Key Fob Battery for the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) This guide will show you how to disassemble and replace the battery in the key fob for the Jeep Compass. First, take the key fob and extract the phys…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos