Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Indicator on a Jeep Compass?

Model: Jeep Compass MK 49, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Side marker light

See other generations:
Video tutorial

If you need to replace the front indicator on your Jeep Compass, follow the steps in this tutorial. First, open the bonnet and remove the upper plastic cover by unscrewing the 2 bolts (10 mm) and the 5 Torx T20 screws.

Next, move to the wheel arch and unscrew the 3 bolts (7 mm) and the single 10 mm bolt. These steps will allow you to free the unit containing the indicator by simply pulling it towards you as shown in the video.

Finally, unscrew the 3 T20 screws, and the indicator is free to be replaced. Reassembly will involve reversing the procedure.


Updated on 27 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight on a Jeep Compass
How to Replace the Front Headlight on a Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) Before starting, open the front bonnet of your Jeep Compass. Begin by disassembling and removing the front bumper by unscrewing the fastening screws …
How to Replace the Front Headlight Bulb of a Jeep Compass
How to Replace the Front Headlight Bulb of a Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) Before you begin, open the front bonnet of your Jeep Compass. Start by disconnecting the electrical connector attached to the blown bulb, using a fla…
How to Remove the Front Headlamp of a Jeep Compass
How to Remove the Front Headlamp of a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Below are the instructions to remove and replace the front bumper and headlamp assembly of the Jeep Compass. First, you need to remove the front bump…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos