Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Cabin Filter on Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Cabin air filter

See other generations:
Video tutorial

Open the glove compartment in front of the passenger seat and empty it completely. To remove the drawer itself, simply squeeze it sideways with your hands at the points where the clips are located.

Voila! At this point, you will be able to see the cabin air filter (or pollen filter). Using a flat screwdriver, release the two clips holding the filter cover closed and lift the two small doors.

As shown in the video, also remove the upper part of the cover by releasing the clips again. Now it is easy to slide out the filter and replace it.


Updated on 28 April 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the Jeep Wrangler 4
How to replace the cabin air filter of the Jeep Wrangler 4
Jeep Wrangler (2018-2026 / JL, MK 4) If you do not know what steps you need to take to replace the air filter inside the cabin of your Jeep Wrangler Mk4, do not worry because in the foll…
How to replace the cabin air filter of the 2013 Jeep Wrangler
How to replace the cabin air filter of the 2013 Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) If you need to replace the cabin air filter in your Jeep Wrangler on your own, then all you have to do is pay attention to the following guide and fo…
Replacing the Cabin Air Filter on a 2014 Jeep Wrangler
Replacing the Cabin Air Filter on a 2014 Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Let's discover the procedure necessary for the removal and replacement of the cabin air filter on a 2014 Jeep Wrangler, in simple steps. First, acces…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos