Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter on a 2014 Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Cabin air filter

Let's discover the procedure necessary for the removal and replacement of the cabin air filter on a 2014 Jeep Wrangler, in simple steps. First, access the vehicle from the passenger side and begin removing the glove compartment; to do this, unclip the two side arms, as shown in the video. Next, remove the filter grille, extracting the filters contained inside; then replace them with new ones of the correct type, inserting them in the correct orientation. Apply the reverse procedure for reassembly!

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on Jeep Wrangler 4XE
How to Replace the Cabin Air Filter on Jeep Wrangler 4XE
Jeep Wrangler (2018-2026 / JL, MK 4) If it's time to replace the cabin air filter in your Jeep Wrangler 4XE, and you don't know the steps to complete the operation, just read the followi…
How to replace the cabin filter in the Jeep Wrangler?
How to replace the cabin filter in the Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the cabin filter in the Jeep Wrangler, open the glove compartment located on the passenger side. Once the glove compartment is open, uncli…
How to replace the cabin filter in the Jeep Wrangler?
How to replace the cabin filter in the Jeep Wrangler?
Jeep Wrangler (2018-2026 / JL, MK 4) In this tutorial, we can see how to replace the cabin filter in the Jeep Wrangler, a very simple and quick operation. First of all, go to the passeng…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos