Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the Jeep Renegade?

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Cabin air filter

In this video, see how to replace the cabin filter in the Jeep Renegade. For this operation, you will need a trim removal tool, a Torx T25 key, and a 5.5 mm socket wrench. Start by removing the lower cover of the glove compartment and unscrewing the 3 Torx screws. Then, open the drawer and unscrew the other 3 internal screws. Remove the side panel of the dashboard and unscrew the last screw underneath it. Once the drawer is removed, you can unscrew the retaining bolt of the filter door and proceed with the replacement. Finally, reassemble everything by following the reverse procedure.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in the 2016 Jeep Renegade?
How to Replace the Cabin Air Filter in the 2016 Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) In the 2016 Jeep Renegade, the cabin air filter is located under the dashboard on the passenger side, behind the glove compartment. The position of t…
How to replace the cabin air filter of the Jeep Renegade
How to replace the cabin air filter of the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) To replace the cabin air filter in your Jeep Renegade by yourself, you must follow the steps described in the following guide. First, purchase a new …
Replace Cabin Filter on Jeep Renegade
Replace Cabin Filter on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video guide, you will learn how to remove and replace the cabin filter of a Jeep Renegade. First, get in the vehicle from the passenger side …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos