Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : How to reset the oil warning light on the Jeep Grand Cherokee

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee MK 5, KL - Years 2013-2023
Part: -board computer
Operation: How to reset the oil warning light on the Jeep Grand Cherokee

If the engine oil change light continues to come on even though you have already replaced it then you need to reset the light manually. Fortunately, the operation is very simple and does not require any kind of direct and / or invasive intervention on the engine compartment. First, go inside the vehicle and press the "Start" button twice in a row to turn on the ignition. Immediately afterwards, press the accelerator pedal fully and slowly three times. At this point the reset is complete and the alarm light should have disappeared permanently.


Posted on 3 April 2024 by ScegliAuto



How to reset the oil change light on the Jeep Grand Cherokee
Jeep Cherokee (2013-2023 / MK 5, KL) If the warning message relating to the change of engine oil continues to appear after each start of your Jeep Grand Cherokee then you must necessaril
How do you reset the Jeep Cherokee Oil Service light?
Jeep Cherokee (2013-2023 / MK 5, KL) In order to reset the Jeep Cherokee's Oil Service warning light, you need to turn the key in the appropriate cylinder, so that the instrument panel i
How to reset the oil warning light on the Jeep Cherokee
Jeep Cherokee (2008-2012 / KK, MK 4) Resetting the oil warning light on the 2010 Jeep Cherokee is very simple and takes just a few seconds to complete the entire operation correctly. Let

Other guides that may interest you

    Frequently Asked Questions

    • Cherokee 2013-2023 - Why doesn't the Jeep Cherokee Start&Stop system work? Read Answer

How to activate the cruise control of the Nissan Qashqai

Let's see how the cruise control is activated on the Nissan Qashqai: you have to activate it by putting the cruise control switch to "on", then, using only the right spoke of the steering wheel, press the "set-" button, then the "res +" button also on the right spoke of the steering wheel and the cruise control indicator lights up on the car's instrument panel display. If the brake pedal is pressed while the cruise control is in operation or if the "cancel" button on the right spoke of the steering wheel is pressed, the cruise control will automatically deactivate and the cruise control indicator on the instrument panel will go out.

Watch the video!


by ScegliAuto

More videos