Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wing Mirror on a Jeep Wrangler Mk3

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Side mirror

See other generations:
Video tutorial

This guide shows how to replace the external wing mirror on a Jeep Wrangler Mk3. No specialist tools are required for this operation. From inside the vehicle's door, use a Torx T40 spanner to remove the two mounting bolts of the mirror base.

Hold the mirror to avoid scratching the door. Clean the door base with a cloth before installing the new part.

Position the new mirror in the housing and tighten the mounting bolts. Check the correct tightness of the part before hitting the road.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

Replacing the External Wing Mirror of the Jeep Wrangler
Replacing the External Wing Mirror of the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) This guide will show you the main steps to remove and replace the external wing mirror and its glass on the Jeep Wrangler. First, move to the outside…
How to Replace the External Wing Mirror on the Jeep Wrangler 3
How to Replace the External Wing Mirror on the Jeep Wrangler 3
Jeep Wrangler (2007-2018 / JK, MK 3) In this brief guide, find instructions on how to remove and replace the external wing mirror on the third series Jeep Wrangler. First, open the front…
How to Replace the External Wing Mirror on the Jeep Wrangler
How to Replace the External Wing Mirror on the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) To replace the external wing mirror on the Jeep Wrangler, loosen the two screws located inside the panel; once these screws are loosened, you can sli…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos