Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the remote battery on the Jeep Compass?

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Key

See other generations:
Video tutorial

In this video, you can see how to replace the remote battery on the Jeep Compass, a very simple and quick operation. You will need a replacement CR2032 3V battery and a small flathead screwdriver.

First, extract the emergency key using the small button located on the back, then insert the tip of the screwdriver into the indicated slot and pry open the two halves of the remote. Once fully open, remove the old battery using the screwdriver and insert the replacement, ensuring it is positioned the correct way.


Updated on 8 May 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery of the Jeep Compass?
How to Replace the Key Fob Battery of the Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) To replace the key fob battery of the Jeep Compass, use a flathead screwdriver to lever inside the groove that forms between the two halves of the fo…
How to Replace the Remote Battery on a Jeep Compass?
How to Replace the Remote Battery on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To replace the remote battery on a Jeep Compass, move the switch located on the back of the device. This will allow you to remove the chrome cover fr…
How to Replace the Key Fob Battery on a Jeep Compass?
How to Replace the Key Fob Battery on a Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) To replace the key fob battery on a Jeep Compass, loosen the screw located just below the key. By loosening this screw, you can open the fob and acce…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos