Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Remote Battery of the Jeep Wrangler?

Model: Jeep Wrangler JL, MK 4 - Years 2018-2026
Part: Key

In this tutorial, you will learn how to replace the remote battery of the Jeep Wrangler. For this simple task, you will need a replacement CR2450 battery and a small flat-head screwdriver. Start by locating the slot on the lower edge, then insert the screwdriver tip into it and lever it open. Once the rear cover is released, open it completely and proceed with the battery replacement, ensuring the positive terminal is facing upwards. Finally, follow the reverse procedure to reassemble everything.

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Wrangler (2018-2026 / JL, MK 4) To replace the remote battery of the Jeep Wrangler, use an object to pry open the left side of the device, allowing you to completely separate the tw…
Jeep Wrangler (2018-2026 / JL, MK 4) Replacing the remote battery on a Jeep Wrangler is very simple. For this operation, you will need a replacement CR2450 3V battery and a small flathea…
Jeep Wrangler (2007-2018 / MK 3, JK) Is the Jeep Wrangler key battery dead and needs changing? Here’s how to remove it from inside the key. Take your remote key, and with the help of a s…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos