Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : How to replace the brake light bulbs in the Jeep Cherokee?

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee XJ, MK 2 - Years 1984-2001
Part: Rear light bulb
Operation: How to replace the brake light bulbs in the Jeep Cherokee?

In this video tutorial we can see how to replace the stop bulbs in the first series Jeep Cherokee. This is a very quick and easy operation. First we open the tailgate of the luggage compartment and unscrew the 3 fixing bolts of the headlight, using a 10mm socket wrench. Once this is done, we disengage the headlight from the bodywork, take the brake light bulb holder, the first at the top, and rotate it anticlockwise to extract it. We replace the bulb and finally reassemble everything following the reverse procedure. The light bulb model to use is 3157.


Posted on 31 May 2024 by ScegliAuto



How to replace the interior light bulbs in the Jeep Cherokee?
Jeep Cherokee (2013-2023 / MK 5, KL) In this video we can see how to replace the bulbs of the interior lights of the Jeep Cherokee. It is a very simple operation, it is recommended to us
How to replace the rear bulbs in the Jeep Cherokee?
Jeep Cherokee (1984-2001 / XJ, MK 2) In this tutorial we can see how to disassemble the rear light of the Jeep Cherokee and replace the bulbs. It is a very simple operation, we only need
How to replace the front brake pads on the Jeep Cherokee
Jeep Cherokee (2013-2023 / MK 5, KL) Let's see below the procedure necessary for the disassembly and replacement of the front brake pads of the Jeep Cherokee. First we lift the car and s

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos