Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Thermostat on a Jeep Wrangler?

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Thermostat

To replace the thermostat on a Jeep Wrangler, lift the bonnet to access the engine bay and locate the thermostat, which is situated at the front of the engine block, directly beneath the air filter housing. Therefore, the air filter housing must be removed by loosening its fastening screws and disconnecting it from the pipe it is attached to. This will allow you to unscrew the bolts securing the thermostat and remove it from its housing, replacing it with a new spare part. After the replacement, reinstall all other components.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Tyre Pressure" Light on a Jeep Wrangler
How to Reset the "Tyre Pressure" Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Before you begin, sit in the driver's seat of your Jeep Wrangler. Start by adjusting the tyre pressures according to the recommended values indicated…
How to Replace the Thermostat on a Jeep Wrangler
How to Replace the Thermostat on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) The thermostat is a crucial component in maintaining optimal health and efficiency of the engine. Therefore, it is essential to replace it promptly i…
How to Reset the "Service" Light on a Jeep Wrangler
How to Reset the "Service" Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Before you can begin, sit in the driver's seat of your Jeep Wrangler. Start by activating the instrument cluster without starting the engine, and wai…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos