Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Wing from the Jeep Wrangler JK

Model: Jeep Wrangler MK 3, JK - Years 2007-2018

In today's video, you will learn how to remove and replace the front wing of the Jeep Wrangler JK by following these simple and quick steps. First, lift the vehicle and start by removing the front wheel by unscrewing the bolts; then use a socket spanner to unscrew the screws of the front wing, which can be found internally, as shown in the video. At this point, use a very thin plastic lever to detach and remove the wing; then simply replace it with the new one by applying the reverse procedure of disassembly!

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials
…
How to Replace the EGR Valve on a Jeep Wrangler
How to Replace the EGR Valve on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Is the EGR valve on your Jeep Wrangler damaged? Here’s how to remove it from the engine bay. Lift the vehicle and secure it, remove the wheel, and de…
Fender Replacement on Jeep Wrangler
Fender Replacement on Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Remove all the clips securing the fender, clearly visible when looking above the wheel, using a flat-head screwdriver to lever them out of their seat…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos