Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Light on a 2018 Jeep Wrangler

Model: Jeep Wrangler JL, MK 4 - Years 2018-2026
Part: Service warning light

In this new guide for your 2018 Jeep Wrangler, you will find the various steps necessary to manually reset the oil light without using professional tools. First, ensure that all the doors of your vehicle are properly closed. Next, press the ignition button and start the instrument cluster. At this point, navigate through the onboard menu and locate the option related to engine oil life. Finally, hold down the "OK" button until the reset is complete and turn off the ignition.

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Wrangler (2007-2018 / MK 3, JK) If you do not know the procedure to manually reset the engine oil light on your 2016 Jeep Wrangler, simply read the following guide carefully and app…
Jeep Wrangler (2018-2026 / JL, MK 4) In this new mini guide dedicated to your Jeep Wrangler fourth generation (2021), you will find all the necessary steps to manually reset the engine o…
Jeep Wrangler (2007-2018 / MK 3, JK) If the oil light continues to illuminate despite having changed the oil and the corresponding filter, you need to manually intervene to reset and eli…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos