Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on the Jeep Compass?

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Warning light – error code

See other generations:
Video tutorial

To reset the Oil Change light on the Jeep Compass, you need to use a diagnostic tool that must be connected to the car's OBD port, located at the bottom left of the steering column. Once the tool is connected, select the car model and the corresponding version from the scanner display.

Follow the instructions shown in the tutorial video to correctly reset the light. This way, you can disconnect the scanner and turn off the instrument panel by turning the key.


Updated on 18 June 2026 by ScegliAuto


Related tutorials

How to Reset the Engine Oil Service Light on a 2016 Jeep Compass
How to Reset the Engine Oil Service Light on a 2016 Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) The video explains how to reset the oil change service light on a 2016 Jeep Compass. First, get into the car and turn on the ignition to check if the…
How to Reset the Oil Change Light on a Jeep Compass
How to Reset the Oil Change Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Before you can start, sit in the driver's seat of your Jeep Compass. Begin by activating the instrument cluster without starting the engine by pressi…
How to Reset the Service Light on a Jeep Compass?
How to Reset the Service Light on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To reset the Service light on a Jeep Compass, start by turning on the ignition to check that the light is present on the instrument cluster. Once the…

    Frequently Asked Questions

    • Compass 2016-2025 - What does the "RPM x1000" light indicate in the Jeep Compass? Read answer
    • Compass 2016-2025 - What does the RPM light on the Jeep Compass mean? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos