Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Engine Oil Service Light on a 2016 Jeep Compass

Model: Jeep Compass MK 49, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

The video explains how to reset the oil change service light on a 2016 Jeep Compass. First, get into the car and turn on the ignition to check if the oil change light is illuminated.

As shown in the video, both the engine light and the 'change oil' message will be displayed, indicating the maintenance task to perform. To reset, turn off the ignition and then turn it back on without starting the engine, and press the accelerator pedal three times within 10 seconds.

You can then turn off the ignition again and perform a final check to confirm the light has been reset.


Updated on 30 June 2026 by ScegliAuto


Related tutorials

Jeep Compass (2006-2016 / MK 49, MK 1) On the Jeep Compass, resetting the oil service light is a very simple and quick operation. First, change the oil and the corresponding filter as per …
Jeep Compass (2016-2025 / 552, MK 2) In this video tutorial, you will find instructions on how to reset the service light for the routine maintenance oil change on a second-generation Je…
Jeep Compass (2016-2025 / 552, MK 2) To reset the Service light on a Jeep Compass, start by turning on the ignition to check that the light is present on the instrument cluster. Once the…

Other guides you may be interested in

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos